This ARKRAY Pocketchem HemoG is an accurate haemoglobin measuring device. It gives results in just 5 seconds. Clinics and hospitals can use this device easily to measure patients’ haemoglobin levels with a 7ul blood sample.

Features

• Compact handheld Hb testing device with calculated HCT
• Just 7µl Blood required (Venous / Whole blood)
• Special Micropipette to collect the right volume of blood sample
• Results calibrated to cell counter
• Easy 4 step process & result in just 5 seconds

HemoG Meter Box Contains

· 1 X Pocketchem HemoG Meter
· 2 X 1.5 V AAA Alkaline Battery
· 1 X Lancing Device
· 1 X Mini Pipette (7uL)
· 10 X Lancets
· 1 X User Manual

HemoG Strips Box Contains

· 50 test strips
· 52 pipet tips
· Calibration chip.

How to Use Process

Ø Preparing for Sampling

Wash your hands thoroughly with soap and warm water, then dry them completely. Warm fingers make it easier to obtain a blood sample.

Ø Using the Lancing Device

Open the Device: Turn the lid of the lancing device counterclockwise to open it.

Insert the Lancet: Fully insert the lancet into its holder and press firmly. Twist and remove the lancet's protective cover.

Close the Device: Turn the lid of the lancing device clockwise to secure it.

Adjust Sampling Depth: Use the dial to set the sampling depth based on your skin type:

1–2: For thin skin
3: For normal skin
4–5: For thick skin
(Note: Higher settings increase the depth of the puncture and the volume of the blood sample.)

Load the Device: Pull back the end of the lancing device to load it. Position it at your fingertip and press the release button to obtain a blood sample.

Ø Collecting Blood Using a Mini Pipette (7 pL)

Attach the Tip: Insert the pipette tip securely into the pipette.
Collect the Blood: Press the pipette’s top button to the first stage and touch it to the blood drop. Slowly release the button to draw the blood into the tip.

Important: Releasing the button too quickly may result in insufficient blood collection.

Release the Blood: Push the button down fully to transfer the blood sample onto the strip.

Ø Collecting Blood Using a Blood Collector Tube (7 µL) (Optional)

Wipe away the first two drops of blood. Apply light pressure to collect the third drop.
Hold the blood collector tube horizontally. Touch the tip to the blood sample. The tube will automatically draw the blood up to the fill line.

Ø Testing and Results

Insert the sample onto the test strip and follow the device instructions.
The device will display haemoglobin and HCT results after a 5-second countdown.

Post-Test Disposal

Lancet: Safely dispose of the used lancet to minimize infection risks.
Test Strip: Eject and discard the test strip properly.
Device: The device will automatically power off after use.

Arkray Pocketchem HemoG Hemoglobin Meter | Hemoglobin Test Kit with 50 Test Strips