Key Features

2-Channel Amplifier Configuration
Up to 70W per Channel at 8 Ohms
High Current Single Push-Pull Circuit
3 x RCA and 1 x Phono MM/MC Inputs
2 x Optical & 1 x Coax Inputs
AL32 Processing Plus
384 kHz/32-Bit USB DAC Functionality
Input Selector Knob with Digital Readout
Smooth Electrical Control Knobs
Front Headphone Jack

Power your passive speaker system and provide your audio components with clear and detailed sound using the Denon PMA-1700NE 140W Stereo Integrated Amplifier in black. An ultra-high current single push-pull circuit power is utilized to minimize distortion as the amplifier powers two channels of audio with 140W total at 8 ohms. Audio can be taken in by a host of components, as the 1700NE provides three RCA, one MM/MC phono, two optical, and one coaxial input. Denon's AL32 Processing Plus circuit board ensures that the audio coming out of the amplifier is detailed and accurate to the artist's intention. As an added bonus, the PMA-1700NE can also be used as a USB DAC.

AL32 Processing Plus

This processor uses algorithms to restore lost information in digital recordings and supports high-resolution 384 kHz/32-bit PCM audio sources.

USB DAC

The PMA-1700NE can also be used as a USB DAC, suppressing jitter for precise digital-to-analog conversion. The DAC supports high resolution audio up to 11.2 MHz DSD and 384 kHz/32-bit PCM input signals.

Smooth Controls

The front panel sports smooth electrical volume, balance, and tone controls for precision adjustment, while still maintaining an analog feel.

A versatile, powerful amp for high-res music listening

Denon built the PMA-1700NE to help celebrate their 110th anniversary. It provides good, clean power, and it's 4-ohm stable, which makes it compatible with a wide range of stereo speakers.

And it's designed to do full justice to high-resolution digital audio sources. There are two optical inputs and one coaxial input for connecting your CD player, TV, and more. All three of these inputs accept audio signals up to 24-bit/192 kHz resolution. The Type-B USB input on the back of the amp is even more impressive — it's compatible with streams and files up to 32-bit/384 kHz resolution.

Going the extra mile

Much of what makes this amp special is out of sight inside the chassis, where circuits are isolated as much as possible to eliminate interference. An Advanced Ultra High Current single push-pull circuit provides efficient high-current power, and a DAC master clock eliminates digital jitter that can smear the subtle details in your favorite tunes.

One nice touch that is visible on the front of the amp is a fluorescent display panel that shows source and sampling rate. You'll likely get plenty of use out of the 1/4" headphone jack and included remote, too.

Special features for vinyl lovers

If you have a treasure trove of beloved records, the PMA-1700NE features a built-in phono preamplifier that's compatible with moving coil and moving magnet cartridges. Analog Mode disables the amp's digital circuitry to preserve the warmth of analog sound.

Additional Features

MM/MC phono equalizer
Input selector knob with digital readout
Front headphone jack
Front display dimmer
TV auto-play with optical/coaxial input detector
Last function memory

SPECIFICATIONS

Amplifier Type	Integrated Amplifier (Preamp/Power Amp Combo)
Channels	2.0
Power Output per Channel	2-Channel Driven: 70 W at 8 Ohms / 20 Hz to 20 kHz / 0.07% THD 140 W at 4 Ohms / 1 kHz / 0.7% THD
Frequency Response	5 Hz to 100 kHz 0/-3 dB
THD	0.01% (8 Ohms, Rated Output -3 dB)
Speaker Impedance	4 to 16 Ohms
Tone Control	Bass (100 Hz): ±8.0 dB Treble (10 kHz): ±8.0 dB
Damping Factor	> 100
DAC	384 kHz / 32-Bit (PCM1795)
Rear A/V Inputs	3x RCA 1x Stereo RCA (Phono MC/MM) with Ground Screw 1x Stereo RCA Power Amp Direct 2x Optical TOSLINK 1x Digital Coaxial 1x USB-B DAC
Rear A/V Outputs	1x RCA Recorder
Front I/O	1x 1/4" / 6.35 mm Headphone Output
Other Rear I/O	1x 1/8" / 3.5 mm (IR) Input 1x 1/8" / 3.5 mm (IR) Output
Speaker I/O	4x Gold-Plated Binding Post Pairs
Media Card Slot	No
A/B Speaker Selection	Yes
Bi-Amp Capability	Yes
Input Sensitivity	Phono (MM): 2.5 mV Phono (MC): 200 mV Line: 125 mV Power Amp Direct: 0.85 V
Max Input Level	Phono (MM): 130 mV (1 kHz) Phono (MC): 10 mV (1 kHz)
Phono RIAA EQ Deviation	±0.5 dB (20 Hz to 20 kHz)
Signal to Noise Ratio	Phono (MM): 89 dB Phono (MC): 74 dB RCA: 107 dB
Wi-Fi	No
Bluetooth	No
AC Input Power	120 VAC, 60 Hz
Power Consumption	Active: 295 W Auto Off: 0.2 W
Dimensions (W x H x D)	17.1 x 5.3 x 16.1" / 434.0 x 135.0 x 410.0 mm
Box Dimensions (LxWxH)	21.4 x 20.5 x 9.9"
Weight	38.8 lb / 17.6 kg
Package Weight	43.97 lb

Denon PMA-1700NE - Stereo Integrated Amplifier