RADIUS 7

The Radius 7 is a stylish and practical vinyl turntable. It delivers a full and exciting sound with striking aesthetic.

A stunning combination of style and technology the Radius 7 Turntable and NIMA Tonearm delivers the ultimate contemporary vinyl playing experience that takes aesthetic appeal, technical performance and musicality to a new level.

The Radius 7’s 20 mm thick acrylic plinths have a 'glass-like' look that is not only visually stunning but contributes towards excellent sonic performance.

It uses an advanced motor/PCB assembly with electronic speed selection. The motor and PCB uses Roksan’s flagship technology. This very high-quality crystal speed control system maintains pitch-perfect speed stability for both 33 and 45 RPM irrespective of voltage variations. The Radius 7 can be purchased with or without the latest-generation hand built NIMA tonearm.

Key Features

5 isolation units (isolation without suspension)
Super-accurate crystal speed control system
Electronic switching between speeds (33 and 45 RPM)
High-quality aluminium alloy pulley system
Stylish new ‘glass effect' acrylic plinths
Red and blue LED illumination to signify speed

NIMA TONEARM

The unique design of the transit locking mechanism of the bearing assembly not only provides a safe transportation method, but also avoids damage if the tonearm is accidentally lifted off its bearing. The counterweight is decoupled and designed to mount off-centre, allowing easy Azimuth correction. The inclusion of VTA adjustment provides optimum alignment for almost any cartridge.

The combination of polished acrylic headshell, silver anodised aluminium tubing and mirror chromed counterweight enhances NIMA's looks and conveys the true lightness and neutrality of this very special arm.

Key Features

Unipivot design for optimum detail retrieval
Ten individual machined parts
Aluminium alloy and stainless steel construction
Transit locking mechanism
Decoupled high quality counterweight
Anti-skate mechanism

CORUS2 CARTRIDGE

The Corus2 is the latest generation Corus moving magnet cartridge from Roksan.

It features a new “VM” magnet arrangement where there is one small magnet for each channel for increased detail and channel separation and a Shibata stylus profile. It is finished in a stylish modern aesthetic with a flip down stylus guard for extra protection.

Key Features

Twin magnets in V arrangement for improved channel separation
Shibata Stylus Profile - Incredible detail retrieval and projection across the full frequency spectrum
Rigid Aluminum Body - Low resonance and high shielding
Integral fold-down stylus guard for protection and peace of mind

SPECIFICATIONS

RADIUS 7 SPECIFICATIONS
Main Bearing Spindle	Bespoke stainless steel
Main Bearing Housing	Precision machined solid brass
Main Bearing Ball	Custom case hardened steel
Pulley	Custom-made aluminium alloy
Platter	Acrylic
Motor	Custom made 24 pole synchronous
Motor Drive	Employs 20 ppm crystal oscillator
Speed	33 and 45 RPM
Power	90 - 240 V 50 - 60 Hz
Rumble	<-75 dB
Wow & Flutter	<0.04 %
Dimensions (W x H x D)	400 x 150 x 350 mm
Weight	7 kg
NIMA TONEARM SPECIFICATIONS
Bearing	Unipivot
Arm Tube	Aluminium
Effective Length	240 mm
Overhang	17.5 mm
Distance from Record Centre	222.5 mm
Effective Mass	15.3 g
Arm Board Thickness	7 - 20 mm (max.)
Recommended Cartridge Weight	5 - 12 g
Recommended Tracking Weight	1.5 - 3.5 g
Internal Wiring	Silver-plated OFC
CORUS2 CARTRDIGE SPECIFICATIONS
Type	VM dual moving magnet
Frequency Response	20Hz to 27 kHz
Output Voltage	3.5 mV (1 kHz, 5 cm/sec.)
Channel Separation	25 dB (1 kHz)
Output Balance	<1.5 dB (1 kHz)
Tracking Weight	1.8 to 2.2 g (2.0 g Recommended)
Coil Impedance	3.2 k ohms (1 kHz)
Vertical Tracking Angle	23°
Recommended Load Impedance	47 k ohms
Recommended Load Capacitance	100 to 200 pF
Coil Inductance	490 mH (1 kHz)
Cantilever	Aluminium tapered pipe
Stylus	Nude Shibata
Cartridge Body	Aluminium
Weight	8.0 g

Roksan Radius 7 - Turntable