Lewitt CONNECT 2 USB-C Audio Interface Overview:

Sensational sound with just a few clicks.

CONNECT 2 is the most user-friendly audio interface for musicians and content creators. It combines great usability, powerful features, and incredible specs.

Comes with CONTROL CENTER software and all the tools to make you sound sensational with just a few clicks.

Autosetup dials in your optimal settings.

With CONNECT 2, you don't need an audio engineering degree to sound great. Run Autosetup and quickly find your perfect settings with the help of the integrated Clipguard, Denoiser, Compressor, and three iconic preamp sounds.

Easy-to-use tools for perfect sound.

Clipguard
Clipguard lets you perform without clipping. A single click is enough, and your signal is safe from clipping even when things get loud. Fantastic for streaming, podcasting, and recording alike.

Three iconic preamp sounds for the right vibe.

Clean gives you unparalleled clarity and fidelity. Perfect if you want to process your signal further.

Warm provides a vintage vibe and helps to smoothen the high-end of overly bright microphones.

Vivid brings even your dullest-sounding microphone alive and adds articulation by boosting the right frequencies.

Direct mute control for all channels.

Mute all channels separately on hardware- and software, or if things are getting out of control, hold MUTE to globally mute everything until you reset your channels the way you want.

Custom button for workflow shortcuts.

The custom button lets you assign one of many workflow shortcuts. You can switch from a recording to a monitoring scenario, bring up the CONTROL CENTER with a single push, and more.

Choose your favorite colors.

Choose your favorite colors and brightness for all the LEDs directly in the CONTROL CENTER - whatever fits your setup or taste.

The best performance for any microphone.

Whether you choose dynamic or condenser, CONNECT 2 will yield the best results with its high-end microphone preamp. It offers up to 72 dB gain, so you'll never need an additional signal booster and an incredible dynamic range of 118 dB(A).

Authentic listening for your headphones.

Zero Ohm headphone outputs retain your headphones' frequency response
High-impedance mode for high-impedance studio headphones
Headphone output in both sizes

Tailored input for instruments.

The differential Hi-Z input works with any guitar, from vintage single coils to modern active humbuckers. It delivers extra clarity to make your recordings sound fresh and defined. Its ground break loop circuit allows for enhanced hum immunity.

Features:

USB-C audio interface
Autosetup for sensational sound with just a few clicks
Clipguard protects from distortion
Single-click Compressor and Denoiser
Three iconic preamp sounds
Touch-based and intuitive controls
Custom button for workflow shortcuts
Individual LED colors and brightness

Specifications:

Device

Features: RGBW LEDs, MUTE, custom button, autogain, input / playback mix, gain reduction display, Kensington lock
Control: Capacitive touch
Inputs: 1x Microphone: balanced 3-pin XLR, 1x Instrument: Hi-Z 6.3 mm jack
Outputs: 2x Speaker: 6.3 mm balanced jack, 1x Headphone: 6.3 mm jack, 1x Headphone: 3.5 mm jack
Metering: 25 step high-resolution
Dimensions and weight: 151 x 110 x 41 mm, 394 g
Power requirements: USB bus-powered

Digital

Type: USB-C audio interface
Software: LEWITT CONTROL CENTER
DAW included: Steinberg Cubase LE, Cubasis LE
Compatibility: MacOS, Windows, iOS (plug and play with USB-C devices, devices with lightning connector require Camera Connection Kit and external bus power)
ASIO driver: Yes
Sample rate: 44.1 kHz, 48 kHz, 96 kHz
Bit rate: 24
USB Audio Class: 2.0
Signal flow: Input / playback mix
DSP powered: Yes
Loopback: Yes
Inputs / Outputs: 4 (includes 2 software channels) / 2
Streaming modes: macOS mode, mobile mode
Min. system requirements: Windows 10 (64 bits): 4 GB RAM minimum, USB 2.0 connector; macOS 10.15 and higher: 4 GB RAM minimum, USB 2.0 connector

Microphone Input

Features: DSP (low-cut filter, clipguard, preamp modes, denoise, compressor, autogain, autosetup)
Type: balanced
Connector: 3-pin XLR
Phantom power: 48 V
Gain range: 0 - 72 dB
Equivalent input noise: –129 dBV (A)
Dynamic range: 118 dB (A) - Without clipguard 118 dB (A)
Max input level: 15.8 dBV
Total harmonic distortion: 0.001%
Frequency response: 20 Hz - 20 kHz (± 0.1 dB)

Instrument Input

Features: DSP (low-cut filter, clipguard, preamp modes, denoise, compressor, autogain, autosetup)
Type: Hi-Z, differential ground loop break circuit
Connector: 6.3 mm jack
Gain range: 0 - 60 dB
Input impedance: 2.5 M Ω
Equivalent input noise: –108 dBV (A)
Dynamic range: 121 dB (A) - Without clipguard 105 dB (A)
Max input level: 12.5 dBV
Total harmonic distortion: 0.0008%
Frequency response: 20 Hz - 20 kHz (± 0.1 dB)

Speaker Output

Features: High volume speaker mode, Mute, Volume, Map system volume controls
Connector: 2x 6.3 mm jack, balanced
Frequency response: 20 Hz - 20 kHz (± 0.1 dB)
Max output level: 12.2 dBV (high volume mode)
Total harmonic distortion: 0.0023%
Impedance: 200Ω

Headphone Output

Features: High impedance headphone mode, Mute, Volume, Map system volume controls
Connector: 1x 6.3 mm jack, stereo, 1x 3.5 mm jack, stereo
Frequency response: 20 Hz - 20 kHz (± 0.2 dB)
Max output level: 6.8 dBV (high impedance mode)
Total harmonic distortion: 0.003%
Impedance: 1.9 Ω