intellijel PEDALIO-1U Overview

1Description
2At a Glance
3Stereo Line In 1U System
4Eurorack Ready

Route your modular through various effects pedals and amplifiers with the intellijel Pedal I/O 1U, a Eurorack module that's part of the Pedal I/O 1U system, which enables the modular synthesist to interact with the impressive assortment of delays, choruses, flangers, phasers, fuzz boxes, tremolos, wah-wahs, amp simulators, compressors and pitch shifter pedals available to guitarists. It also grants guitarists access to the myriad filters, ring mods, wavefolders and the near infinite CV modulation delights inherent in Eurorack.

Pedal I/O is an impedance converter, which provides proper drive and loading for any FX pedals or instruments you connect. The Pedal Interface 1U module connects either to the Pedal I/O Jacks 1U module or directly to intellijel's 7U cases using the 7U Case Adaptor. Two Pedal Interface modules can be connected to a 7U case in this manner, with one taking the left input and output on the case, while other takes the right. The module includes a power ribbon cable.

At a Glance

Use the Pedal I/O�s Return circuit as a direct box for connecting any instrument.
Signals arriving at the Pedal I/O System pass through a Class-A triode emulator, allowing for some tubelike overdrive at high gain setting.
Separate gain controls on both the Send and Return.
Use Pedal I/O in the studio as an active re-amping device to play prerecorded tracks back through guitar amplifiers or pedals.
Low Mix output impedance for driving long cables, lower noise, and minimum interference from outside sources.
Switch to invert phase of the return signal.
Switch to select line or pedal/instrument level output.

Stereo Line In 1U System

Pedal I/O 1U Module
A pair of 1/4" jacks (one send, and one return) for connecting your pedal

Eurorack Ready

16 HP Eurorack format module (1U)
Maximum depth: 1.1" (29mm)
Includes power ribbon cable with Eurorack power headers
Power consumption: +12V: 10mA, -12V: 10mA

In the Box

intellijel Pedal I/O 1U Hi-Z Send/Return Eurorack Module (16 HP)
Ribbon Power Cable
Limited 2-Year Manufacturer Warranty

Not in the Box

Essential Eurorack Cases (Not Included)

user manual

15.5 MB

Table of Contents

Description
At a Glance
Stereo Line In 1U System
Eurorack Ready

intellijel PEDALIO-1U Specs

Key Specs

Sound Generation	Analog
Audio I/O	1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Input 1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output
MIDI I/O	No
CV/Gate I/O	No
Patch Points	1x 1/8" / 3.5 mm TS Input 1x 1/8" / 3.5 mm TS Output
Eurorack Current Consumption	10 mA on +12 V Rail 10 mA on -12 V Rail
Horizontal Pitch	16 HP

General

Item Type	Eurorack Module
Sound Generation	Analog
Expression Controls	No
Number of Pads	No
Built-In Speaker	No

Synthesis

Oscillators	No
Mixer	No
Amplifiers	No
Envelopes	No
Filters	No
LFOs	No

Sequencing & Recording

Sequencer	No
Arpeggiator	No

Connectivity

Audio I/O	1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Input 1x 1/8" / 3.5 mm TS Unbalanced Mono Modular/Eurorack Output
MIDI I/O	No
CV/Gate I/O	No
Patch Points	1x 1/8" / 3.5 mm TS Input 1x 1/8" / 3.5 mm TS Output
Sync I/O	No

Power

Power Requirements	Eurorack Power
Eurorack Current Consumption	10 mA on +12 V Rail 10 mA on -12 V Rail

Physical

Rackmount Size	1 RU
Horizontal Pitch	16 HP
Included Accessories	No

Packaging Info

Package Weight	0.235 lb
Box Dimensions (LxWxH)	4.5 x 3.3 x 3.2"

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

intellijel Pedal I/O 1U Hi-Z Send/Return Eurorack Module (16 HP)