KEMET's Flexible Termination (FT-CAP) MLCC in C0G dielectric incorporates a unique, flexible termination system that is integrated with KEMET's standard termination materials. A conductive silver epoxy is utilized between the base metal and nickel barrier layers of KEMET's standard termination system in order to establish pliability while maintaining terminal strength, solderability and electrical performance. This technology was developed in order to address the primary failure mode of MLCCs- flex cracks, which are typically the result of excessive tensile and shear stresses produced during board flexure and thermal cycling. Flexible termination technology inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures. Capacitance change with reference to ambient temperature is limited to Â±30 ppm/ÂºC from -55Â°C to +125Â°C.

AEC-Q200 automotive qualified
Up to 5 mm flex-bend capability
Operating temperature range from -55Â°C to +125Â°C
Capacitance offerings ranging from 0.5 pF up to 0.47 ÂµF
DC voltage ratings of 10, 16, 25, 50, 100, 200 and 250V
No piezoelectric noise
Extremely low ESR and ESL
High thermal stability
High ripple current capability
Non-polar device, minimizing installation concerns

Other details

Brand	KEMET
Part Number	C0603X331F5GACAUTO
Quantity	Each (Supplied on Cut Tape)
Technical Data Sheet EN
CAD Multiple Formats EN
Manufacturer Catalogue EN
Product Change Notice EN

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.

Kemet C0603X331F5GACAUTO C0603X331F5GACAUTO SMD Multilayer Ceramic Capacitor 330 pF 50 V 0603 [1608 Metric] &plusmn; 1% C0G / NP0

Kemet C0603X331F5GACAUTO C0603X331F5GACAUTO SMD Multilayer Ceramic Capacitor 330 pF 50 V 0603 [1608 Metric] ± 1% C0G / NP0