RODE NT1 Signature Series Overview

Sporting the same warm, silky sonic character that made the NT1 series a go-to studio workhorse for millions, the purple NT1 Signature Series Studio Condenser Microphone from RODE is the latest edition of the iconic large-diaphragm mic. With an incredibly low self-noise of 4 dBA and a high SPL handling of 142 dB, the NT1 Signature Series is a versatile Swiss Army knife built to deliver a classic studio sound for a range of applications, from vocal and instrument recording to podcasting, content creation, and voice-over work.

The classic RODE HF6 1" true condenser capsule brings a smooth frequency response and high sensitivity to the table. The internal JFET impedance converter and bipolar output buffer help contribute to the low noise and clean sound. The cardioid pickup pattern helps you avoid unwanted sounds to the rear and sides, a vital feature for podcasting and content creation in untreated spaces. The finish is highly durable, resisting scuffs, scratches, and other physical blemishes that can plague well-used workhorse mics. The NT1 Signature Series includes a 20' XLR cable, an SM6 shockmount and pop filter, and a dust cover.

Internally Shock-Mounted HF6 Cardioid Condenser Capsule

Behind the protective mesh grille, the mic features Rode's 1" gold-sputtered HF6 capsule, designed to provide a detailed midrange response with smooth highs and warm bass.
The cardioid polar pattern focuses audio capture on the source in front of the mic, picking up less unwanted ambient sound from the back and sides.
The transducer itself is suspended inside the microphone, using Rycote's industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide an extremely low noise level. The NT1 Signature Series is an incredibly quiet microphone, measuring only 4 dBA of self-noise.
The mic is powered by phantom power through the XLR connector.

Bundled Accessories

The NT1 Signature Series is supplied with the SM6, a studio-grade suspension shockmount that provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.
The SM6 includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility.
The mic also comes with a balanced 20' XLR microphone cable
A dust cover is also supplied.

UPC: 698813014088

In the Box

RODE NT1 Signature Series Large-Diaphragm Condenser Microphone (Purple)
RODE SM6 Shock Mount with Detachable Pop Filter
XLR Cable (20')
Dust Cover
Limited 10-Year Manufacturer Warranty

User Manual

0.1 MB

RODE NT1 Signature Series Specs

Key Specs

Form Factor	Large Diaphragm Mic / Stand/Boom Mount
Polar Pattern	Cardioid
Frequency Range	20 Hz to 20 kHz
Maximum SPL	142 dB SPL
Output Connector	1x XLR 3-Pin Male (on Mic)
Power Sources	Phantom Power
Color	Purple

Microphone

Primary Applications	Studio Recording, Podcast
Form Factor	Large Diaphragm Mic / Stand/Boom Mount
Intended Sound Sources	Vocals, Speech/Voice-Over, Acoustic Guitar, Piano, Drums, Instruments, Choir, Room Ambiance
Sound Field	Mono
Element Type	1x Condenser
Polar Pattern	Cardioid
Included Tone Caps	No
Gain Adjustment	No
On-Board Controls	No

Performance

Frequency Range	20 Hz to 20 kHz
Maximum SPL	142 dB SPL
Sensitivity	32 dBV/Pa

Connectivity

Output Connector

1x XLR 3-Pin Male (on Mic)

Power

Power Sources	Phantom Power
Operating Voltage	48 V

Physical

Color	Purple
Mounting Thread Size	1/4"-20 Female
Dimensions	H: 7.4 x W: 2 x L: 2" / H: 18.9 x W: 5.2 x L: 5.2 cm
Weight	11 oz / 313 g

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

RODE NT1 Signature Series Large-Diaphragm Condenser Microphone (Purple)